Lihat sumber untuk IGOS Nusantara dan Ganti Ethernet

Konfigurasi ada di:

== Ethernet melalui udev ==
/etc/udev/rules.d/70-persistent-net.rules

 # Berkas: /etc/udev/rules.d/70-persistent-net.rules
 
 # Empat baris berikut hasil dari anaconda saat masih di server1
 # Networking Interface (rule written by anaconda)
 #SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1e:58:A1:A2:A3", ATTR{type}=="1", KERNEL=="eth*",   NAME="eth1"
 # Networking Interface (rule written by anaconda)
 #SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:11:11:B1:B2:B3", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
 
 # Baris berikut hasil udev dan perlu melakukan Perubahan1 dan Perubahan2
 # ----------------------------------------------------------------------
 # Perubahan1: eth2 ke eth0
 # PCI device 0x8086:0x10cc (e1000e)
 #SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:AA:BB:11", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"
 SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:AA:BB:11", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
 
 # Perubahan2: eth2 ke eth1
 # PCI device 0x8086:0x10d3 (e1000e) (custom name provided by external tool)
 #SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:AA:BB:12", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"
 SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:AA:BB:12", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
 # ----------------------------------------------------------------------

== Konfigurasi ifcfg-ethX ==
* /etc/sysconfig/network-scripts/ifcfg-eth0
* /etc/sysconfig/networking/devices/ifcfg-eth0
* /etc/sysconfig/networking/profiles/default/ifcfg-eth0

=== ifcfg-eth0 ===
* /etc/sysconfig/network-scripts/ifcfg-eth0
 # cat /etc/sysconfig/network-scripts/ifcfg-eth0
 # Networking Interface
 DEVICE=eth0
 # HWADDR=
 ONBOOT=yes
 IPADDR=192.168.228.4
 BOOTPROTO=none
 NETMASK=255.255.255.0
 TYPE=Ethernet
 GATEWAY=192.168.228.1
 DNS1=8.8.8.8
 DNS2=8.8.4.4
 IPV6INIT=no
 USERCTL=no
 PREFIX=24
 NAME="System eth0"
 # UUID=

=== ifcfg-eth1 ===
* /etc/sysconfig/network-scripts/ifcfg-eth1
 # cat /etc/sysconfig/network-scripts/ifcfg-eth1
 # Networking Interface
 DEVICE=eth1
 # HWADDR=
 ONBOOT=yes
 BOOTPROTO=none
 TYPE=Ethernet
 IPV6INIT=no
 USERCTL=no
 IPADDR=192.168.228.8
 NETMASK=255.255.255.0
 DNS1=8.8.8.8
 DNS2=8.8.4.4
 # GATEWAY=192.168.228.1

Tautan:
* Linux Home Server Howto http://www.brennan.id.au/index.html
* http://www.brennan.id.au/04-Network_Configuration.html
* Linux Network Configuration http://www.yolinux.com/TUTORIALS/LinuxTutorialNetworking.html