IGOS Nusantara dan Ethernet

Konfigurasi ada di:

Ethernet melalui udev

/etc/udev/rules.d/70-persistent-net.rules

# Berkas: /etc/udev/rules.d/70-persistent-net.rules

# This file was automatically generated by the /lib/udev/write_net_rules
# program run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.

# Networking Interface (rule written by anaconda)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1e:58:9a:8a:90", ATTR{type}=="1", KERNEL=="eth*",   NAME="eth1"
# Networking Interface (rule written by anaconda)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:11:11:a1:48:53", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x10cc (e1000e)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:ac:d6:f4", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:ac:d6:f4", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x10d3 (e1000e) (custom name provided by external tool)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:ac:d6:f5", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:ac:d6:f5", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

Konfigurasi ifcfg-ethX

• /etc/sysconfig/network-scripts/ifcfg-eth0
• /etc/sysconfig/networking/devices/ifcfg-eth0
• /etc/sysconfig/networking/profiles/default/ifcfg-eth0

ifcfg-eth0

• /etc/sysconfig/network-scripts/ifcfg-eth0

# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Networking Interface
DEVICE=eth0
HWADDR=00:15:17:AC:D6:F4
ONBOOT=yes
IPADDR=192.168.228.4
BOOTPROTO=none
NETMASK=255.255.255.0
TYPE=Ethernet
GATEWAY=192.168.228.1
DNS1=192.168.228.1
IPV6INIT=no
USERCTL=no
PREFIX=24
NAME="System eth0"
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03

ifcfg-eth1

• /etc/sysconfig/network-scripts/ifcfg-eth1

# cat /etc/sysconfig/network-scripts/ifcfg-eth1
# Networking Interface
DEVICE=eth1
HWADDR=00:15:17:AC:D6:F5
ONBOOT=yes
BOOTPROTO=none
TYPE=Ethernet
IPV6INIT=no
USERCTL=no
IPADDR=192.168.228.8
NETMASK=255.255.255.0
DNS2=8.8.8.8
DNS1=192.168.228.1
#GATEWAY=192.168.228.1

Tautan:

• Linux Home Server Howto http://www.brennan.id.au/index.html
• http://www.brennan.id.au/04-Network_Configuration.html
• Linux Network Configuration http://www.yolinux.com/TUTORIALS/LinuxTutorialNetworking.html